鋼板倉使用應當注意哪些細節？

What details should be paid attention to when using a steel silo?

    隨著使用鋼板倉的人越來越多，應用范圍越來越廣，人們對鋼板倉質量的要求也越來越高。除了在鋼板倉建設階段要嚴格按照施工方案和相關規范進行施工外，在鋼板倉的使用過程中，也有很多細節是需要大家注意的，畢竟細節決定成敗，一旦有什么問題沒注意到，很可能會影響到鋼板倉中儲存物料的安全。
    With the increasing number of people using steel silos and their wider application range, people's requirements for the quality of steel silos are also becoming higher and higher. In addition to strictly following the construction plan and relevant specifications during the construction phase of the steel plate warehouse, there are also many details that need to be paid attention to during the use of the steel plate warehouse. After all, details determine success or failure. If any problems are not noticed, it may affect the safety of the materials stored in the steel plate warehouse.    

    1、為了避免鋼板倉頻繁發生故障，縮短使用壽命，我們不僅要保證鋼板倉本身的質量合格，而且要嚴格按照鋼板倉使用規范操作，還需要定期維護鋼板倉。

        In order to avoid frequent failures and shorten the service life of the steel plate warehouse, we not only need to ensure the quality of the steel plate warehouse itself, but also strictly follow the specifications for the use of the steel plate warehouse, and regularly maintain the steel plate warehouse.

    2、作為操作人員，為了避免鋼板倉因操作不當而出現故障，影響正常使用，在操作鋼板倉前，要對操作人員進行系統的技術培訓，培訓合格后才能進行操作。

        As operators, in order to avoid malfunctions in the steel plate warehouse due to improper operation, which may affect normal use, it is necessary to provide systematic technical training to the operators before operating the steel plate warehouse. Only after passing the training can they proceed with the operation.

   3、在鋼板倉建造工程完工后，如果我們要向鋼板倉進料的話，可以分批進料，前期進料不超過設計庫容的一半;間隔4周后觀察庫體沉降情況，庫體沉降均勻后進行二次入料，入料量不超過總庫容的三分之二;同樣時間間隔2周后進行第三次入料。除此之外，在入料時也要同時注意鋼板倉內存儲物料的分布情況，避免出現料位偏差的情況。
        After the completion of the steel silo construction project, if we want to feed the steel silo, we can feed it in batches, and the initial feeding should not exceed half of the designed storage capacity; Observe the settlement of the storage body after a 4-week interval. After the settlement of the storage body is uniform, conduct a second feeding, with the feeding amount not exceeding two-thirds of the total storage capacity; The third feeding will be conducted after a 2-week interval. In addition, attention should also be paid to the distribution of stored materials in the steel plate warehouse during feeding to avoid material level deviation.

  4、不要在鋼板倉的頂部或墻上隨意打洞，也不要隨意增加負荷。倉體不得連接和支撐提升機框架及其他設備和設施。在鋼板倉基礎完工后5米內，不得進行挖土及其他影響地基的活動。

        Do not randomly drill holes on the top or walls of the steel silo, and do not arbitrarily increase the load. The warehouse shall not be connected or supported to the hoist frame and other equipment and facilities. Excavation and other activities that may affect the foundation shall not be carried out within 5 meters after the completion of the steel silo foundation.