大型鋼板庫直觀地顯示設備的運行狀態，在控制室內，各種控制信號都集中在控制板或計算機上。操作簡單、快速、安全可靠。操作員只需在控制室操作，即可搬運整個大型鋼板庫并向前移動。測試設備也配備齊全。

    The large steel plate warehouse intuitively displays the operating status of the equipment, and in the control room, various control signals are concentrated on the control board or computer. Easy to operate, fast, safe and reliable. The operator only needs to operate in the control room to transport the entire large steel plate warehouse and move it forward. The testing equipment is also fully equipped.

        　　大型鋼板庫中常用的檢測設備如下：物料品質快速檢測設備、測溫設備、料位設備、監控設備等安全運行設備。大型鋼板庫存儲容量大：單個倉庫的存儲容量為10000-500000噸，可以形成更大的存儲組。

        The commonly used detection equipment in large steel plate warehouses includes rapid material quality detection equipment, temperature measurement equipment, material level equipment, monitoring equipment, and other safety operation equipment. Large steel plate inventory storage capacity: The storage capacity of a single warehouse is 10000-500000 tons, which can form larger storage groups.

　　儲存方便：根據不同物料及廠家情況，物料儲存方式可采用正向機儲存、溜槽儲存或動力管道儲存。整體規劃：庫體為圓柱形，庫頂、庫底為球形，庫底為圓柱形。

        Convenient storage: According to different materials and manufacturer conditions, material storage methods can be forward machine storage, chute storage, or power pipeline storage. Overall planning: The storage body is cylindrical, the top and bottom of the storage are spherical, and the bottom of the storage is cylindrical.

　　根據大型鋼板庫防雷接地系統的方案原則，大型鋼板庫防雷方案應滿足現行標準《建筑物防雷方案標準》中二級防雷建筑物的防雷要求。

        According to the principles of the lightning protection and grounding system for large steel plate warehouses, the lightning protection scheme for large steel plate warehouses should meet the lightning protection requirements for secondary lightning protection buildings in the current standard "Building Lightning Protection Scheme Standard".

　　操作塔頂設避雷網、避雷針或采用金屬構件作避雷器。避雷網、避雷針、金屬構件及操作方式應與引下線連接。引下線的設置方法如下：

        Install lightning protection nets, lightning rods, or use metal components as lightning arresters at the top of the tower. The lightning protection network, lightning rods, metal components, and operation methods should be connected to the down conductor. The method for setting up down conductors is as follows:
　　

        大型鋼板庫的防雷方案應采用大型鋼板庫頂部的圍欄和大型鋼板庫上的廊道作為避雷器。倉庫上的廊道與倉庫頂部的圍欄采用焊接連接。引下線可采用鍍鋅扁鋼，鍍鋅扁鋼截面、厚度都不應小于規定的尺寸。操作塔引下線及各料倉引下線數量不少于2根，間距不大于18m，對稱布置。

        The lightning protection scheme for large steel plate warehouses should use the fence on the top of the large steel plate warehouse and the corridor on the large steel plate warehouse as lightning arresters. The corridor on the warehouse is connected to the fence on the top of the warehouse by welding. The down conductor can be made of galvanized flat steel, and the cross-section and thickness of the galvanized flat steel should not be less than the specified size. The number of down conductors for the operation tower and each silo shall not be less than 2, with a spacing of no more than 18m, symmetrically arranged.
　　

        接地設備可采用根部鋼筋，縱向和橫向鋼筋應焊接，沖擊接地電阻不應大于10Ω。 庫組底座未連接，底座留有變形縫時，應采用扁鋼或圓鋼焊接，并留有足夠的變形量。鍍鋅扁鋼截面、厚度都不應小于規定的尺寸；圓鋼直徑不小于12mm。

        Grounding equipment can use root reinforcement, and longitudinal and transverse reinforcement should be welded. The impact grounding resistance should not exceed 10 Ω. When the base of the warehouse group is not connected and there are deformation joints left on the base, flat steel or round steel should be welded with sufficient deformation. The cross-section and thickness of galvanized flat steel should not be less than the specified dimensions; The diameter of round steel shall not be less than 12mm.
　　

        技術設備的機架和金屬管應作防靜電接地，接地電阻不大于100Ω。 防靜電接地、防雷接地和維護接地設備應合并，接地電阻應滿足最小值的要求。

        The racks and metal pipes of technical equipment should be grounded for anti-static purposes, with a grounding resistance not exceeding 100 Ω. Anti static grounding, lightning protection grounding, and maintenance grounding equipment should be combined, and the grounding resistance should meet the minimum requirement.